內窺鏡經過長期的手術室儀器設備維修，發現內窺鏡設備維修故障根據維修難易和故障大小，可分為復雜故障、中等故障和簡單故障。那么內窺鏡設備光學亮度等級故障的原因以及避免怎么處理嗎？

After long-term maintenance of instruments and equipment in the operating room, endoscopic equipment maintenance failures can be divided into complex failures, medium failures and simple failures according to the difficulty of maintenance and the size of failures. What are the reasons for the failure of the optical brightness level of the endoscope equipment and how to avoid it?

1.光學亮度等級故障的原因:

1. Cause of optical brightness level failure:

1)將濕導光棒插入光源——電子觸點生銹——無法傳輸電子信號。

1) Insert the wet light guide rod into the light source - the electronic contact is rusted - and the electronic signal cannot be transmitted.

2)使用操作不當導致零件松動——電子觸點接觸不良——無法傳遞電子信號。

2) Loose parts due to improper use - poor contact of electronic contacts - unable to transmit electronic signals.

3)調光線纜連接不當——主機與光源連接不當——無法傳輸電子信號。

3) The dimming cable is improperly connected - the host is improperly connected to the light source - and the electronic signal cannot be transmitted.

2.如何避免調光的問題？

2. How to avoid dimming?

1)在將內窺鏡插入光源之前，確保光導桿的頂部是干燥的。

1) Before inserting the endoscope into the light source, make sure that the top of the light guide rod is dry.

2)保持光源插座干燥，接觸片不被氧化。

2) Keep the light source socket dry and the contact piece will not be oxidized.

3)避免內窺鏡碰撞。

3) Avoid endoscope collision.

4)使用內窺鏡前，檢查調光功能是否正常。

4) Before using the endoscope, check whether the dimming function is normal.

此外只有認真地做好日常保養，才能夠延長內窺鏡設備的使用壽命、減少硬鏡的磨損和老化、降低維修成本、減少不必要的停機時間。更多相關信息了解就來我們網站http://www.rxjhq.cn進行咨詢！

In addition, only by doing a good job in daily maintenance can the service life of the endoscope equipment be extended, the wear and aging of the hard mirror be reduced, the maintenance cost be reduced, and the unnecessary downtime be reduced. For more information, please come to our website http://www.rxjhq.cn Consult!